Curved spring washers
Curved spring washers are used where axial clearance needs to be offset. This could be offsetting a small amount of clearance with a relatively light load. All dimensions have 1 "curve". Washers with 1 "curve" allow the washer to be pressed flat without the cam having reduced force as a result. It is, however, recommended that items always be sized so as to use less travel.
Shop By
Shopping Options
- 62030In stock: 608Material Spring steelDe - External diameter (in) 0.1575Di - Internal diameter (in) 0.0709h max - Maximum height (in) 0.0354h min - Minimum height (in) 0.0177s - Thickness (in) 0.0098
- 62040In stock: 2,315Material Spring steelDe - External diameter (in) 0.1772Di - Internal diameter (in) 0.0866h max - Maximum height (in) 0.0394h min - Minimum height (in) 0.0197s - Thickness (in) 0.0118
- 62050In stock: 564Material Spring steelDe - External diameter (in) 0.1969Di - Internal diameter (in) 0.0984h max - Maximum height (in) 0.0394h min - Minimum height (in) 0.0197s - Thickness (in) 0.0118
- 62060In stock: 780Material Spring steelDe - External diameter (in) 0.2165Di - Internal diameter (in) 0.1102h max - Maximum height (in) 0.0433h min - Minimum height (in) 0.0217s - Thickness (in) 0.0118
- 62070In stock: 8,469Material Spring steelDe - External diameter (in) 0.2362Di - Internal diameter (in) 0.1260h max - Maximum height (in) 0.0512h min - Minimum height (in) 0.0256s - Thickness (in) 0.0157
- 62080In stock: 440Material Spring steelDe - External diameter (in) 0.2756Di - Internal diameter (in) 0.1457h max - Maximum height (in) 0.0551h min - Minimum height (in) 0.0276s - Thickness (in) 0.0157
- 62090In stock: 145Material Spring steelDe - External diameter (in) 0.3150Di - Internal diameter (in) 0.1693h max - Maximum height (in) 0.0630h min - Minimum height (in) 0.0315s - Thickness (in) 0.0197
- 62100In stock: 306Material Spring steelDe - External diameter (in) 0.3937Di - Internal diameter (in) 0.2087h max - Maximum height (in) 0.0709h min - Minimum height (in) 0.0354s - Thickness (in) 0.0197
- 62110In stock: 1,881Material Spring steelDe - External diameter (in) 0.4331Di - Internal diameter (in) 0.2520h max - Maximum height (in) 0.0866h min - Minimum height (in) 0.0433s - Thickness (in) 0.0197
- 62120In stock: 0Material Spring steelDe - External diameter (in) 0.4724Di - Internal diameter (in) 0.2913h max - Maximum height (in) 0.0945h min - Minimum height (in) 0.0394s - Thickness (in) 0.0197
Material
DIN 17222 - C 75 - WERKSTOFF NO. 1.0605
Description
Curved spring washers are used where axial clearance needs to be offset. This could be offsetting a small amount of clearance with a relatively light load.
All dimensions have 1 "curve". Cams with 1 "curve" allow the washer to be pressed flat without the cam having reduced force as a result. It is, however, recommended that items always be sized so as to use less travel.
Surface
The 4 smallest sizes are phosphatised and oiled. The other sizes are galvanised 9-12 my.